Skip to main content
Microsoft Teams Rooms devices can show digital signage on the front-of-room display when the room is idle. You can use a PADS4 HTML5 Viewer presentation as the signage source. This page explains how to check the Viewer URL, set up Intune for Android devices, add the PADS4 source in Teams Rooms Pro Management, and assign it to rooms. Digital signage in Teams Rooms is a Microsoft Teams feature, not a PADS4 integration. Teams Rooms loads the PADS4 HTML5 Viewer as a web page. You do not install PADS4 software on the room device.
Microsoft released digital signage in Teams Rooms in August 2026. If the feature does not work as this page describes, check the Microsoft Teams Rooms release notes for changes.

Supported devices

  • Microsoft Teams Rooms on Windows
  • Microsoft Teams Rooms on Android
Use a device that Microsoft certifies for Teams Rooms, for example from Neat, Logitech, Poly, Yealink, Crestron, or Lenovo. You cannot test this setup on other hardware or on a virtual device.

Minimum requirements

A Teams Rooms Basic license does not support digital signage or Intune management.

Other prerequisites

  • A PADS4 Server that is installed and running.
  • A published PADS4 presentation for the HTML5 Viewer.
  • A public HTTPS URL for the HTML5 Viewer. The URL has this format: https://<server>/<domain>/apps/viewer/. Replace <server> with the host name of your PADS4 Server. Replace <domain> with your PADS4 domain. The default domain is PADS4.
  • The Global Administrator role, or the Teams Rooms Pro Management administrator role.
  • Access to the Intune admin center as an Intune administrator.

Check the Viewer URL

Teams Rooms accepts only a web page that meets these requirements. Check each one before you configure Teams Rooms.
  1. Open a private browser window that has no cookies, and go to the Viewer URL. Make sure the presentation starts without a sign-in prompt.
  2. On a computer with normal internet access, check the response headers. Replace <viewer-url> with your Viewer URL.
  3. In the output, check these headers:
    • There is no x-frame-options header, or it does not block framing.
    • There is no content-security-policy header, or it has no frame-ancestors directive, or the directive includes https://teams.microsoft.com.
If the PADS4 Server sends a blocking x-frame-options header or frame-ancestors directive, Teams Rooms does not show an error. It refuses to load the source. Change the header on the server that hosts the Viewer before you continue.

Set up Intune for Android devices

Skip this section if you use Teams Rooms on Windows. Teams Rooms on Android must be enrolled in Intune with the Android Open Source Project (AOSP) method. Without this enrollment, Teams Rooms Pro Management cannot send settings, including digital signage, to the device. You do this once for your tenant.
If the AOSP enrollment profile does not exist, the device still signs in and takes calls. But the settings from Teams Rooms Pro Management fail, with errors such as Settings fetch failed.

Create the AOSP enrollment profile

  1. Sign in to the Intune admin center as an Intune administrator.
  2. Go to Devices > Enrollment > Android.
  3. Under Android Open Source Project (AOSP) > Enrollment Profiles, select Corporate-owned, user-associated devices.
  4. Select Create policy.
  5. Configure the profile:
  6. Select Next, check the settings, and then select Create.
A tenant can have only one enrollment profile with For Microsoft Teams devices enabled. If a profile already exists, do not create a second one. Check its settings and token expiration date instead.
A compliance policy is not required for digital signage. It prevents devices from showing as noncompliant, and it prevents Conditional Access from signing devices out after enrollment.
  1. In the Intune admin center, go to Devices > Compliance, and then select Create policy.
  2. For Platform, select Android (AOSP), and then select Create.
  3. Enter a name for the policy.
  4. Under Device Health, set Rooted Devices to Block. Set the minimum and maximum OS version that fit your devices.
  5. Under System Security, set Require encryption of data storage on device to Yes.
  6. Assign the policy to all AOSP-enrolled devices, or to a dynamic Microsoft Entra ID group for this enrollment profile, and then create the policy.

Enroll the device

A device that you enroll after you create the profile uses the profile automatically. If you enrolled a device before the profile existed, reset the device to factory settings and enroll it again.

Add PADS4 as a signage source

  1. Sign in to Teams Rooms Pro Management.
  2. Go to Settings > Digital signage, and turn on digital signage for the tenant.
  3. Select Add source.
  4. Enter a name and a description for the source, for example PADS4, and then select Next.
  5. For the source type, select Custom.
  6. Enter the Viewer URL that you checked in Check the Viewer URL, and then select Next.
  7. Accept the terms of use, and then select Submit.
Teams Rooms does not support SharePoint and OneDrive for Business URLs as custom sources.
If Teams Rooms Pro Management rejects the URL, check the requirements in Check the Viewer URL.

Assign the source to rooms

Assign the source to one room

  1. In Teams Rooms Pro Management, go to Rooms, and then select the room.
  2. Go to Settings > Digital signage, and turn it on.
  3. Select the PADS4 source that you added.
  4. Set the signage settings, and then select Apply. For the settings, see Signage settings.
  5. Select Apply now, and then select Submit.
The device must be online, connected, and signed in. If you just enrolled or restarted the device, wait 10 to 15 minutes before you apply the settings.

Assign the source to several rooms

  1. On the digital signage page of the tenant, select the row of the PADS4 source.
  2. Select Assign to rooms.
  3. Confirm the source, and set the signage settings.
  4. Search for and select the rooms or room groups, and then apply the settings.

Signage settings

Verify the setup

  1. Make sure that no meeting is scheduled for the room. Do not touch the console until the idle time that you set has passed.
  2. Check that the PADS4 presentation appears in full screen on the display of the room.
  3. Touch the console. The Teams home screen appears immediately.
The Status tab in Teams Rooms Pro Management does not show the health of a custom signage source. Check the physical display to verify the setup.

Troubleshooting

If these solutions do not solve the problem, collect the device logs before you contact Microsoft Support. In Teams Rooms Pro Management, select the room, and then go to Actions > Log Collection.