1. First-Time Use
Before installation, ensure that the PADS4 Server is set up and configured properly.The minimum PADS4 Server version required is PADS4 Foundation 2023.1.
1.1 Prerequisites
Before installing PADS4IAdea on the IAdea XMP-8550 / XMP-8552, ensure the following conditions are met:- OS: Android 12
- Firmware Version:
4.0.2-48 - Network Connectivity: Device must be connected to a network
1.2 Resetting the Device
If the device was used previously, perform a factory reset to clear storage and prevent software conflicts.1
Step One
Open the Basic Settings on IAdea.
2
Step Two
Click on Advanced.
3
Step Three
Select System → Factory Default.
4
Step Four
Press OK to start the factory reset.
1.3 Checking Device Firmware
To ensure full PADS4 Viewer compatibility, verify that the device is running firmware version 4.0.2-48.1
Step One
Open the Basic Settings menu.
2
Step Two
Click on Advanced.
3
Step Three
Select Information.
4
Step Four
The Firmware Version is displayed on the right side of the screen.
1.4 Updating Device Firmware
If the firmware is outdated, update it following IAdea’s official instructions. Firmware updates are available on the IAdea Support Page.2. Installing PADS4 Viewer
Follow the steps below to install and configure PADS4 Viewer on the IAdea XMP-8550 / XMP-8552.2.1 Installing PADS4IAdea from USB Stick
The PADS4IAdea.apk file is available on the PADS4 Server at:Installation Steps
1
Step One
Copy the PADS4IAdea.apk onto a USB stick.
2
Step Two
Insert the USB stick into the IAdea XMP-8550 / XMP-8552 device.
3
Step Three
Open Basic Settings.
4
Step Four
Click on Advanced.
5
Step Five
Click three times in the lower right corner of the Advanced menu to access Android.
6
Step Six
The Android Home Screen will now be visible.
7
Step Seven
Open the File Manager app.
8
Step Eight
Allow storage and USB permissions if prompted.
9
Step Nine
Click on Internal Storage (top left), then select USB Storage.
10
Step Ten
Select PADS4IAdea.apk and click Install.
11
Step Eleven
Once installed, press Open.
3. Configuring the Device for PADS4IAdea
To ensure PADS4 Viewer starts automatically, update the device settings.3.1 Setting Automatic Start
1
Step One
Open the PADS4IAdea app and click on System Settings.
2
Step Two
Click on Advanced.
3
Step Three
Select Content → AppStart.
4
Step Four
Open the Advanced submenu.
5
Step Five
In Package Name, enter:
6
Step Six
Click Set to save the setting.
7
Step Seven
Click the Back button to return to Basic Settings.
3.2 Connecting to PADS4 Server
PADS4 Server Address Format:- Protocol:
httporhttps(depends on SSL certificate). - Host: DNS name or IP address of PADS4 Server.
- Port: (Optional - specify only if using non-default ports).
- Host Path: Configured in System Management
(default: PADS4).
Connection Steps
1
Step One
Enter the PADS4 Server Location.
2
Step Two - *Optional*
Specify a Viewer Name (if left blank, PADS4 will generate one).
3
Step Three
Press Start.
4
Step Four
Grant permission to permanently store content when prompted.
5
Step Five
Chrome will update in the background, and the app will restart.
4. Updating PADS4 Viewer & PADS4IAdea App
The PADS4 Viewer & PADS4IAdea app will automatically update when the PADS4 Server is updated.5. Supported Features & Capabilities
| Feature | Description |
|---|---|
| ✅ | Automatic Software Updates – Updates when the PADS4 Server updates. |
| ✅ | Offline Mode – The device continues running presentations for 7 days while offline. |
| ✅ | HTTP & HTTPS Support |
| ✅ | Cluster Viewer Support |
| ✅ | Maximum 2 Videos per Page – Supports Seamless Video, Rotation, Reflection, Skew, Flip. |
| ❌ | Streaming Video – Not supported. |
| ✅ | PowerPoint & PDF Elements – (PowerPoint requires installation on PADS4 Server). |
| ✅ | Device Management – Remote control via PADS4 CTRL Center & PADS4 Agent. |
| ✅ | Reboot & Restart Viewer – Supported. |
| ❌ | Wake-on-LAN – Not supported. |
| ✅ | Proof of Play Tracking – Monitors content playback history. |