Skip to main content
This guide provides step-by-step instructions for installing and configuring PADS4 Viewer on Qbic TD-0350 devices running Android.

​
Before You Start

​
Supported Qbic TD-0350 Devices

The following Qbic TD-0350 device is supported:
  • TD-0350 (Android 7.1.1)
Ensure your PADS4 Server is installed and configured before proceeding.

​
Minimum Requirements

PADS4 Server Version: 2021.2 or later
Firmware Version: Kernel 3.0.101+ Build v1.1.0 Ensure your device firmware meets the minimum requirements before proceeding with installation.

​
First-Time Setup

When you turn on the Qbic TD-0350 for the first time, a configuration wizard will start. If the configuration wizard does not start, perform a factory reset before continuing.

​
Performing a Factory Reset

1

Step One

Open Settings → Backup & Reset.
2

Step Two

Select Factory Data Reset.
3

Step Three

Press Reset Tablet.
4

Step Four

Confirm by pressing Erase Everything.
Once completed, the device will restart and display the welcome screen.

​
Installing PADS4 Viewer

To install the PADS4 Viewer, access the Android menu on the device.

​
Step 1: Check Device Firmware

1

Step One

Open Settings.
2

Step Two

Navigate to About Device.
3

Step Three

Verify that the Build Number matches Kernel 3.0.101+ Build v1.1.0.
If the firmware is outdated, contact Qbic for firmware updates.

​
Step 2: Install PADS4Qbic from USB Stick

Download PADS4Qbic APK:
1

Step One

Copy PADS4Qbic.apk to a USB stick.
2

Step Two

Insert the USB stick into the Qbic TD-0350.
3

Step Three

Open Android Settings → Player Settings.
4

Step Four

Enable Switch to Native Android Mode.
5

Step Five

Close Settings to access the Android Home Screen.
6

Step Six

Open ApkInstaller → Press Install → Select USB Memory.
7

Step Seven

Select PADS4Qbic.apk and press Install.
8

Step Eight

Allow installation from Unknown Sources if prompted.
Do not open PADS4Qbic after installation.

​
Configuring the Qbic TD-0350 for PADS4Qbic

​
Step 1: Set PADS4 as the Default App

1

Step One

Open Android Settings → Player Settings.
2

Step Two

Disable Switch to Native Android Mode.
3

Step Three

Enable Kiosk Mode.
4

Step Four

Select Launched Activity or Webpage URL.
5

Step Five

Press Select Application → Choose PADS4Qbic.
6

Step Six

Press Set.
Ensure the settings below are configured correctly:

​
Connecting to the PADS4 Server

​
Step 1: Enter PADS4 Server Details

1

Step One

Open PADS4Qbic and specify the Server Address.
2

Step Two

(Optional) Specify a Viewer Name.
3

Step Three

Press Start.
If Chrome is missing, it will be downloaded automatically.

​
Adjusting PADS4 Viewer Settings

To access settings, hold the left mouse button for 3 seconds. You can also configure settings remotely using:
PADS4 CTRL Center
PADS4 Agent

​
Updating PADS4 Viewer & PADS4Qbic App

After installation, updates will be applied automatically when the PADS4 Server is updated.

​
Accessing the Android Menu

To access the Android menu while PADS4 is running:
Press Home Button + Volume Down in sequence. To prevent a reboot, first open PADS4Qbic settings.

​
Supported Features & Limitations

​
General Features

​
Device Features

​
Content & Data Support

​
Device Management

​
Troubleshooting