Skip to main content
The Iiyama TW1023ASC is an Android touchscreen. You install the PADS4 Viewer app on the display to show PADS4 presentations. This page explains how to reset the display, install the app, and connect it to your PADS4 Server.

​
Before you begin

​
Supported devices

  • TW1023ASC-B2P (Android 13)

​
Minimum requirements

​
Other prerequisites

  • A PADS4 Server that is fully running.
  • A USB flash drive. You use it to install the app.

​
Prepare the device

When you turn on the display for the first time, the Android home screen appears. If it does not appear, or if someone used the display before, reset the display.

​
Reset the device

A factory reset removes all data and settings from the display.
  1. Open Settings.
  2. Go to System > Reset options.
  3. Select Erase all data (factory reset).
  4. Confirm the reset.

​
Install PADS4 Viewer

Get PADS4IiyamaTouch.apk from the Apps folder of your PADS4 Server. You find the Apps folder at http(s)://<server>/<domain>/apps. Use the file from your own server so that the app version matches the server.
  1. Copy PADS4IiyamaTouch.apk to a USB flash drive.
  2. Insert the USB flash drive into the display.
  3. Open the File Manager app.
  4. Go to the USB flash drive, and then select PADS4IiyamaTouch.apk.
  5. If Android blocks the installation, select Settings in the message, turn on Allow from this source for File Manager, and then go back.
  6. Select Install, and then open the PADS4 IIyama Touch app.

​
Connect the Viewer to the PADS4 Server

The server location has this format: http(s)://<server>/<domain>. Replace <server> with the IP address or host name of your PADS4 Server. Replace <domain> with your PADS4 domain. The default domain is PADS4.
  1. Enter the PADS4 Server location.
  2. (Optional) Enter a name for the Viewer. If you leave the field empty, the PADS4 Server generates a name.
  3. Select Start.
  4. Set PADS4 IIyama Touch as the Home app, and then select Always.
The Viewer connects to the PADS4 Server.
To change the screen orientation and other options, open Viewer Settings.