WRP 1000
This guide provides step-by-step instructions for installing and configuring PADS4 Viewer on the IAdea WRP-1000 (Android 9) device.
1. First-Time Use
Before installation, ensure that the PADS4 Server is set up and configured properly.
1.1 Resetting the Device
If the device was used previously, perform a factory reset to clear storage and prevent software conflicts.
Step One
Open IAdea Basic Settings.
Step Two
Click on Advanced.
Step Three
Select System → Factory Default.
Step Four
Click OK to confirm the factory reset.
After resetting, the Basic Settings screen will appear.
1.2 Checking Device Firmware
To ensure full PADS4 Viewer compatibility, verify that the device is running firmware version 3.4.1 or higher.
Step One
Open IAdea Basic Settings.
Step Two
Click on Advanced.
Step Three
Select Information.
Step Four
The Firmware Version is displayed on the right-hand side of the screen.
1.3 Updating Firmware
If the firmware is outdated, update it by following these steps:
Step One
Open IAdea Basic Settings.
Step Two
Click on Advanced.
Step Three
Select System → Firmware Update.
Step Four
Click on Check Latest Firmware from Internet.
Step Five
If a new firmware version is available, select Update from Internet.
2. Installing PADS4 Viewer
Follow the steps below to install and configure PADS4 Viewer on the IAdea WRP-1000.
2.1 Installing PADS4IAdea from USB Stick
The PADS4IAdea.apk file is available on the PADS4 Server at:
Alternatively, download the latest version from here and place it in the PADS4 Server apps directory.
Installation Steps
Step One
Copy the PADS4IAdea.apk onto a USB stick.
Step Two
Insert the USB stick into the IAdea WRP-1000 device.
Step Three
Open IAdea Basic Settings.
Step Four
Click on Advanced.
Step Five
Click three times in the lower right corner of the Advanced menu to access Android.
Step Six
The Android Home Screen will now be visible.
Step Seven
Open the Files app.
Step Eight
Select USB Disk and click on PADS4IAdea.apk.
Step Nine
Click CONTINUE in the confirmation dialog.
Step Ten
Click INSTALL when prompted.
Step Eleven
Once installed, click DONE.
3. Configuring PADS4 Viewer
3.1 Setting Automatic Start
Step One
Open IAdea Basic Settings.
Step Two
Click on Advanced.
Step Three
Select Content → AppStart.
Step Four
Click (+)Advanced.
Step Five
In Package Name, enter:
Step Six
Click Set to save the setting.
3.2 Connecting to PADS4 Server
PADS4 Server Address Format:
- Protocol:
httporhttps(depends on SSL certificate). - Host: DNS name or IP address of PADS4 Server.
- Port: (Optional - specify only if using non-default ports).
- Host Path: Configured in System Management (default:
PADS4).
Connection Steps
Step One
Enter the PADS4 Server Location.
Step Two - *Optional*
Specify a Viewer Name (if left blank, PADS4 will generate one).
Step Three
Press Start.
Step Four
Grant permission to access media and files when prompted.
Step Five
The PADS4 Viewer will be downloaded and installed.
4. Updating PADS4 Viewer
The PADS4 Viewer will automatically update when the PADS4 Server is updated.
5. Supported Features & Capabilities
| Feature | Description |
|---|---|
| ✅ | Automatic Software Updates – Updates when the PADS4 Server updates. |
| ✅ | Offline Mode – The device continues running presentations for 7 days while offline. |
| ✅ | HTTP & HTTPS Support |
| ✅ | Streaming Video – HTTPS & HLS supported. |
| ✅ | Maximum 2 FHD Videos Simultaneously |
| ✅ | PowerPoint & PDF Elements – (PowerPoint requires installation on PADS4 Server). |
| ✅ | Device Management – Remote control via PADS4 CTRL Center & PADS4 Agent. |
| ✅ | Reboot & Restart Viewer – Supported. |
| ❌ | Wake-on-LAN – Not supported. |
| ✅ | Proof of Play Tracking – Monitors content playback history. |