Skip to main content
This guide provides step-by-step instructions for installing and configuring the PADS4 Web Launcher on Hisense DM66GE Android displays. It covers initial setup, APK installation, autostart configuration, and viewer setup.

​
Compatible Devices:

  • DM66GE (Android 14)
Support for the Hisense DM66GE has been added to our PADS4 Generic Launcher solution in PADS4 version 2025.2, kindly refer to the PADS4 Generic Android Viewer manual for further instructions.

​
Minimum requirements

PADS4 Version Required: 2025.2 Device Firmware: V01.00.01F.Q0302

​
Prerequisites

  • Download the latest PADS4WebLauncher.apk from your PADS4 server (e.g., https://[your-server]/[domain]/apps) or from here, and copy it to a USB stick.
  • Ensure the PADS4 Server is set up and accessible.

​
Installing PADS4 Viewer

  1. Power on the screen.
  2. Access applications menu and select More Apps
  3. Insert the USB stick into the screen.
  4. Select File Browser.
  5. Navigate to the USB drive and select PADS4WebLauncher.apk.
  6. Click Install and wait for completion.
  7. Once the installation is finished, select Cancel
  8. Exit the File browser

​
Enabling Auto-Start

  1. Go to Settings on the screen.
  2. Navigate to Signal Management
  3. Select Homepage setting.
  4. Select PADS4 Web Launcher from the list.
  5. Click on Back to close the Setting

​
Configuring Connection

  1. Launch the PADS4 Web Launcher.
  2. Enter the Server URL in the format <protocol>://<host>:<port>/<hostpath>/
  3. Fill in the ViewerName as required.
  4. Click Start to connect.
The PADS4 viewer is now connected and ready for use.