> ## Documentation Index
> Fetch the complete documentation index at: https://docs.pads4.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Tizen 7.0 SSSP10

This guide provides **step-by-step instructions** for installing and configuring **PADS4 Viewer** on **Samsung Tizen 7.0 (SSSP10)** devices.

***

## **Before You Start**

### **Supported Samsung Tizen 7.0 Devices**

The following **Samsung SSSP10 (Tizen 7.0)** device is supported:

* **SSSP10 (Tizen 7.0)**

**Ensure your PADS4 Server is installed and configured before proceeding.**

***

## **Minimum Requirements**

**PADS4 Server Version:** **2023.1.1 or later**\
**Firmware Version:** **1030.x or later**

**Ensure your device firmware meets the minimum requirements before proceeding with installation.**

***

## **First-Time Setup**

When you **turn on** the Samsung SSSP10 for the first time, a **configuration wizard** will start.

**If the configuration wizard does not start, perform a factory reset before continuing.**

***

## **Performing a Factory Reset**

<Steps>
  <Step title="Step One">
    Turn the **screen off**.
  </Step>

  <Step title="Step Two">
    On the remote control, press:\
    `Mute + 1 + 8 + 2 + ON`
  </Step>

  <Step title="Step Three">
    Navigate to **Option** → Select **Factory Reset**.
  </Step>
</Steps>

**The device will restart and display the welcome screen.**

***

## **Uninstalling an App (If Required)**

**If you cannot access the device menu, uninstall the existing app first.**

<Steps>
  <Step title="Step One">
    Open **Home Menu**.
  </Step>

  <Step title="Step Two">
    Navigate to **URL Launcher Settings**.
  </Step>

  <Step title="Step Three">
    Select **Uninstall**.
  </Step>

  <Step title="Step Four">
    Confirm the uninstallation.
  </Step>
</Steps>

***

## **Installing PADS4 Viewer**

### **Step 1: Run the Setup Wizard**

<Steps>
  <Step title="Step One">
    Select **Language** and press **Next**.
  </Step>

  <Step title="Step Two">
    Select **Manual Setup** and press **Next**.
  </Step>

  <Step title="Step Three">
    Choose **Landscape** as the display orientation.
  </Step>

  <Step title="Step Four">
    Under **Player Selection**, select **Custom App**.
  </Step>
</Steps>

**Specify your PADS4 Server URL:**

```
http://<server>/PADS4/apps/tizen  
https://<server>/PADS4/apps/tizen  
```

**Replace `<server>`** with the **IP address** or **domain name** of your **PADS4 Server**.\
**Ensure "PADS4" is in CAPITAL letters, or the connection will fail due to case sensitivity.**

<Steps>
  <Step title="Step Five">
    Select **Skip** for **RM Server** (if not used).
  </Step>

  <Step title="Step Six">
    Disable **Auto Power Off**.
  </Step>

  <Step title="Step Seven">
    Set the **current time**.
  </Step>

  <Step title="Step Eight">
    (Optional) Set a **PIN** (default is `000000`).
  </Step>

  <Step title="Step Nine">
    Complete the **Setup Wizard**.
  </Step>
</Steps>

**To launch the viewer manually:**

* Open **Home Menu** → Select **Custom App**.
* If the setup wizard does not start automatically, switch to **HDMI**, then press **Menu** on the remote control and navigate to **System → Setup**.

**Once configured, the PADS4 HTML5 Viewer will download and start automatically.**

***

## **Checking Device Firmware**

**Ensure your Samsung SSSP10 firmware is up to date before running PADS4.**

<Steps>
  <Step title="Step One">
    Power on the screen and press **Home** on the remote control.
  </Step>

  <Step title="Step Two">
    Open **Settings** → **All Settings**.
  </Step>

  <Step title="Step Three">
    Navigate to **Support** → **Software Update**.
  </Step>

  <Step title="Step Four">
    Verify that the **Software Version** is **1030.x or later**.
  </Step>
</Steps>

***

## **Updating Firmware**

<Steps>
  <Step title="Step One">
    Insert a **USB Stick** with the latest firmware.
  </Step>

  <Step title="Step Two">
    Press **Menu** on the remote control.
  </Step>

  <Step title="Step Three">
    Navigate to **Support** → **Software Update**.
  </Step>

  <Step title="Step Four">
    Select **Update Now** and follow the on-screen instructions.
  </Step>
</Steps>

***

## **Adjusting PADS4 Viewer Settings**

**To access viewer settings:** Hold the **left mouse button** or **touch the screen** for **3 seconds**.

***

## **Enabling 4K Video Mode**

**Enable Ultra HD/4K via PADS4 CTRL Center:**

<Steps>
  <Step title="Step One">
    Open **PADS4 CTRL Center** and log in.
  </Step>

  <Step title="Step Two">
    Go to **Viewers** → Select your **Samsung Tizen Viewer**.
  </Step>

  <Step title="Step Three">
    Click the **3-dot menu** → Select **View Details**.
  </Step>

  <Step title="Step Four">
    Click the **Settings Cogwheel** to open **Screen Settings**.
  </Step>

  <Step title="Step Five">
    Open the **Style Tab** and enable **Ultra HD/4K Mode**.
  </Step>
</Steps>

**You can play only ONE 4K video per page.**

***

## **Supported Features & Limitations**

### **General Features**

| Feature | Description                                                              |
| :-----: | ------------------------------------------------------------------------ |
|    ✅    | **Automatic Software Updates** – The HTML5 Viewer updates automatically. |
|    ✅    | **Offline Mode** – Plays scheduled content for **7 days** while offline. |

### **Device Features**

| Feature | Description                                                                                 |
| :-----: | ------------------------------------------------------------------------------------------- |
|    ✅    | **Portrait Mode** – Set rotation to **270°** in Viewer Settings. Do **NOT** use SSP rotate. |
|    ✅    | **Cluster Viewer** – Can be used in a **cluster setup**.                                    |
|    ✅    | **Block Remote Control** – Prevent unauthorized screen control.                             |
|    ✅    | **Wake on LAN** – Supported.                                                                |
|    ❌    | **Turn Off Display** – Not supported.                                                       |

### **Video & Content Support**

| Feature | Description                                                        |
| :-----: | ------------------------------------------------------------------ |
|    ✅    | **4K Video Mode** – Enabled via **PADS4 CTRL Center**.             |
|    ✅    | **Seamless Video Playback** – **Supported** in **Landscape Mode**. |
|    ✅    | **Streaming** – Supports **HTTP, HLS, RTP, UDP**.                  |
|    ❌    | **Playback Speed Adjustment** – Not supported.                     |

### **Device Management**

| Feature | Description                                 |
| :-----: | ------------------------------------------- |
|    ✅    | **Remote Management via PADS4 CTRL Center** |
|    ✅    | **Connection State Monitoring & Alerts**    |
|    ✅    | **Reboot Support** – Supported.             |
|    ❌    | **Shutdown Support** – Not supported.       |

***

## **Troubleshooting**

| **Issue**                     | **Solution**                                 |
| ----------------------------- | -------------------------------------------- |
| **Viewer does not start**     | Check firmware version.                      |
| **Network connection issues** | Verify **PADS4 Server URL** is correct.      |
| **Playback issues with 4K**   | Ensure **only 1** 4K video is used per page. |