> ## Documentation Index
> Fetch the complete documentation index at: https://docs.pads4.com/llms.txt
> Use this file to discover all available pages before exploring further.

# DS-DT60P LED controller

This manual provides step-by-step instructions for configuring the Hikvision DS-DT60P device and installing the PADS4 Viewer. It covers initial setup, APK installation, autostart configuration, and viewer setup.

**Compatible Devices:**

* **DS-DT60P** (Android 12)

**Minimum requirements**

PADS4 Version Required: **2025.1**

## **Prerequisites**

Download the latest **PADS4WebLauncher.apk** from your PADS4 server (e.g., https\://\[your-server]/\[domain]/apps) or from [**here**](https://github.com/PADS4/PADS4-Viewer-Android/releases/tag/v1.3), and copy it to a USB stick.

Ensure the PADS4 Server is set up and accessible.

## **Installing PADS4 Viewer**

1. Power on the screen and access the installed applications menu.
2. Insert the USB stick into the screen.
3. Select **FileBrowser**.
4. Navigate to the USB drive and select **PADS4WebLauncher.apk**.
5. Click **Continue** on the warning prompt.
6. Click **Install** and wait for completion.
7. Select **Done**, then close FileBrowser

## **Enabling Auto-Start**

1. Go to **Settings** on the screen.
2. Navigate to **App Management**.
3. Select Run at startup.
4. **Enable Run** at startup.
5. Select **PADS4 Web Launcher** from the list.
6. Restart the screen to apply changes.

## **Configuring Connection**

1. Launch the PADS4 Web Launcher.
2. Enter the **Server URL** in the format `<protocol>://<host>:<port>/<hostpath>/`
3. Fill in the **ViewerName** as required.
4. Click **Start** to connect.

The PADS4 viewer is now connected and ready for use.