> ## Documentation Index
> Fetch the complete documentation index at: https://docs.pads4.com/llms.txt
> Use this file to discover all available pages before exploring further.

# TSS 1070 B S

This guide provides step-by-step instructions for installing and configuring **PADS4 Viewer** on **Crestron TSS-1070-B-S** devices.

## **1. First-Time Use**

During installation, you will need to configure the **PADS4 Server location**. It is recommended to **complete the installation of the PADS4 Server first** before configuring the Crestron device.

<Note>
  The minimum **PADS4 Server version** required to run **PADS4 on Crestron** is **PADS4 Foundation 2022.3**.
</Note>

### **1.1 Resetting the Device**

If the device was previously used, a **factory reset** is recommended to clear storage and prevent interference with the **PADS4 Viewer software**.

<Steps>
  <Step title="Step One">
    Log in to the **web configuration interface** of the Crestron device.
  </Step>

  <Step title="Step Two">
    Click the **arrow button** next to the **Action button** at the top-right of the screen.
  </Step>

  <Step title="Step Three">
    Select **Restore**.
  </Step>

  <Step title="Step Four">
    Click **Yes** in the confirmation dialog.
  </Step>
</Steps>

### **1.2 Updating Firmware**

**PADS4 is included with the Crestron firmware** and cannot be installed separately.

<Note>
  The minimum firmware version that includes **PADS4** is **2.003.1011**.
</Note>

## **2. Installing PADS4 Viewer**

Follow the instructions below to run **PADS4 Viewer** on Crestron.

### **2.1 Set Crestron Application Mode to PADS4**

**PADS4** is included in the **Crestron firmware** and can be installed by selecting **PADS4 as the Application Mode** in the **web configuration interface**.

<Steps>
  <Step title="Step One">
    Log in to the **web configuration interface** of the Crestron device.
  </Step>

  <Step title="Step Two">
    Click the **Settings tab**.
  </Step>

  <Step title="Step Three">
    Select **Applications**.
  </Step>

  <Step title="Step Four">
    Select **PADS4** from the **Application Mode dropdown**.
  </Step>

  <Step title="Step Five">
    Click **"Save Changes"** at the top-right of the web interface.
  </Step>

  <Step title="Step Six">
    Click **"Yes, Reboot Now"** in the confirmation dialog.
  </Step>
</Steps>

### **2.2 Connecting to PADS4 Server**

After installation, **PADS4 Viewer** must be connected to the **PADS4 Server**.

#### **PADS4 Server Address Format**

```
protocol://host:port/hostpath/  
```

* **Protocol:** Use `HTTP` or `HTTPS`, depending on whether a **valid SSL certificate** is used.
* **Host:** The **DNS name** or **IP address** of the **PADS4 Server**.
* **Port:** Optional – if **non-default HTTP/HTTPS ports** are used, specify the **port number**.
* **Host Path:** Configured in **PADS4 System Management** (default: `PADS4`).

**Example:**

```
http://localhost/pads4  
```

#### **Connection Steps**

<Steps>
  <Step title="Step One">
    Enter the **PADS4 Server Location**.
  </Step>

  <Step title="Step Two">
    (Optional) Specify a **Viewer Name**. If left blank, the **PADS4 Server** will generate one.
  </Step>

  <Step title="Step Three">
    Press the **Start** button.
  </Step>

  <Step title="Step Four">
    Grant **permission to permanently store content** on the device when prompted.
  </Step>

  <Step title="Step Five">
    If the **Android System WebView** is outdated, it will be automatically updated.
  </Step>

  <Step title="Step Six">
    **PADS4 Viewer** will be downloaded. Wait for installation to complete, and the **Viewer will start** automatically.
  </Step>
</Steps>

### **2.3 Adjust PADS4 Viewer Settings**

To **adjust PADS4 Viewer settings** directly on the **Crestron display**:

* **Hold down the left mouse button** or **touch the screen for 3 seconds** to open the **Options Screen**.
* To **return to the PADS4 app**, press the **Launcher Settings** button.

## **3. Configuring the Crestron Occupancy Sensor**

**PADS4 supports the Crestron occupancy sensor.** Follow the steps below to **pair the sensor** and **register it in PADS4 Workspace**.

### **3.1 Pairing the Occupancy Sensor with the Screen**

<Steps>
  <Step title="Step One">
    Log in to the **web configuration interface** of the Crestron screen.
  </Step>

  <Step title="Step Two">
    Click the **Settings tab**.
  </Step>

  <Step title="Step Three">
    Open **Device Pairing**.
  </Step>

  <Step title="Step Four">
    Select **POE Occupancy Sensor** in the **Device Model dropdown**.
  </Step>

  <Step title="Step Five">
    Enter the **IP address** or **FQDN** of the **sensor**.
  </Step>

  <Step title="Step Six">
    Click **Save Changes** at the top-right of the web interface.
  </Step>

  <Step title="Step Seven">
    After saving, the **Pairing Status** should change to **Online**.
  </Step>
</Steps>

### **3.2 Finding the Occupancy Sensor in PADS4 Workspace**

After pairing, the sensor will be **visible in PADS4 Workspace Admin**.

<Steps>
  <Step title="Step One">
    Log in to **PADS4 Workspace Admin**.
  </Step>

  <Step title="Step Two">
    Click **Occupancy Sensors**.
  </Step>

  <Step title="Step Three">
    Click the **Sensors tab**.
  </Step>

  <Step title="Step Four">
    The **sensor** will be listed in the **table**.
  </Step>
</Steps>

## **4. Supported Features & Limitations**

### **General Features**

| Feature | Description                                               |
| :-----: | --------------------------------------------------------- |
|    ✅    | **Portrait Mode** – Supported.                            |
|    ✅    | **HTTP/HTTPS** – Supported.                               |
|    ✅    | **Offline Content Library Storage** – Cached locally.     |
|    ❌    | **Block Remote Control** – Not supported.                 |
|    ✅    | **Remote Management via PADS4 CTRL Center & PADS4 Agent** |

### **Content & Playback**

| Feature | Description                                                                |
| :-----: | -------------------------------------------------------------------------- |
|    ✅    | **Supports JPG, PNG, BMP, GIF, Text, Shapes, Tables, Interactive Buttons** |
|    ✅    | **Single Video Playback**                                                  |
|    ❌    | **Streaming Video** – Not supported.                                       |
|    ✅    | **Content from PADS4 Content Library & URL**                               |
|    ✅    | **Web Element** – Usage of **interactive Address Bar** not supported.      |

### **Device Management**

| Feature | Description                                 |
| :-----: | ------------------------------------------- |
|    ✅    | **Reboot & Restart Viewer** – Supported.    |
|    ❌    | **Shutdown & Wake-on-LAN** – Not supported. |
|    ✅    | **Retrieve Screenshots & System Logs**      |
|    ✅    | **Install Fonts & Proof of Play Tracking**  |

***

## **5. General Limitations**

<Warning>
  **Local file storage for content is not supported.**
</Warning>

<Warning>
  **Proof of Play Limit: Maximum of 50,000 records stored offline.**
</Warning>